Language
箭头向下
CN
EN
Product
Product Center
Products   
-- For optical fiber sensing systems(DTS、DAS&DVS)Key FeatureslSpectral Range 800-1700nml3dB Band-width 10/100/200MHzlRise time Min.1.8nslIntegrated amplifier circuitlIntegrated boost and temperature compensation circuitlLow noise, high gainlCommon input single-mode and multimode fiberslDual channelslSingle power supply DC 12VlSMA outputlCan be customizedApplicationslRaman Optical Fiber Temperature Monitoring System DTSlDistributed Optical Fiber Vibration Monitoring System DVSlDistributed Optical Fiber Acoustic Wave SensorlOTDRDescriptionThe KY-APRM-BW-I-2 series dual-channel avalanche photoreceiver uses imported avalanche photodiodes with high gain, fast response and low dark current. It integrates low noise broadband transimpedance amplifier TIA, boost and temperature compensation cir...
------ The KY-PRM seriesKey FeatureslSpectral Range 850-1650nml3dB Band-width10GHzlSensitivity:-19dBmlSaturated optical power:1dBmlIntegrates low noise transimpedance amplifierlCompact structure,SMA outputApplicationslHigh-speed optical pulse detectionlMicrowave photonic linklOptical phased array radarlBrillouin fiber sensing systemlHigh-speed optical fiber communication systemDescription The KY-PRM-10G series 10GHz high speed photoreceiver integrates 10GHz PIN detector and low noise broadband transimpedance amplifier. It features high gain, high sensitivity, AC-coupled output and flat gain. The module is powered by DC 12V, the fiber interface is FC/APC, and the electrical signal is output by the SMA port. It’s mainly used in high-speed fiber transmission systems, ROF ,fiber sensing s...
------ The KY-APRM seriesKey FeatureslFree Space optical inputlDifferent velocities 200Mbsp、1.25/2.5/10GbpslIntegrated boost, temperature compensation, and amplifier circuitslHigh sensitivitylφ20mm Adapter for optical antennalM4 adapter for the M4 post mountslSingle power supply DC 12VlDimensions 47x42x26mmlSMA outputApplicationslWhite LED communicationlLaser radarlVisible laser communicationOptionslLimited AmplifierlSignal format TTL/PECL/ECL, etc.Description The KY-APRM series avalanche photoreceiver for free space optical communication adopts imported avalanche photodiodes with high gain, fast response and low dark current. It integrates low noise broadband transimpedance amplifier TIA, boost and temperature compensation circuit,with high gain and high sensitivity. The mo...
------ The KY-PRM seriesKey FeatureslSpectral Range 850-1650nml3dB Band-width30GHzlSensitivity:-10dBmlSaturated optical power:4dBmlIntegrates low noise transimpedance amplifierlCompact structure 95x70x22mmlK-type connector outputApplicationslHigh-speed optical pulse detectionlMicrowave photonic linklOptical phased array radarlBrillouin fiber sensing systemlHigh-speed optical fiber communication systemDescription The KY-PRM-40G series 40GHz high speed photoreceiver integrates 40GHz PIN detector and low noise broadband transimpedance amplifier. It features high gain, high sensitivity, AC-coupled output and flat gain. The module is powered by DC 12V, the fiber interface is FC/APC, and the electrical signal is output by the K-type connector. It’s mainly used in high-speed fiber transmissi...
------ The KY-BPRM seriesKey FeatureslSpectral Range 850-1650nml3dB Band-width30GHzlSensitivity:-10dBmlSaturated optical power:4dBmlIntegrates low noise transimpedance amplifierlCompact structure 95x70x22mmlK-type connector outputApplicationsl40Gbps DQPSK/DPSK optical fiber communication systemlMicrowave photonic linkDescription The KY-BPRM-40G series 40Gbps high speed photoreceiver integrates two 40Gbps PIN photodiodes and low noise wideband transimpedance amplifier(TIA). It features high gain, high sensitivity, AC-coupled output and flat gain. The module is powered by DC 12V, two fiber input ports, the fiber interface is FC/APC, and the electrical signal is output by K-type connector. It’s mainly used in 40Gbps DQPSK/DPSK high-speed fiber transmission systems, microwave photonic lin...
-----The KY-PRM-XCH seriesKey FeatureslSpectral Range 800-1700nml3dB Band-width Max. 1.5GHzlRise time Min.lThe number of channels: 3, 8, 18, 40, etc. lIntegrated amplifier amplifierlLow noise, high gainlSingle power supply DC 12VlSMA outputlCan be customizedApplicationslPicosecond light pulse detectionlLaser radarlOptical fiber sensing systemlSpectroscopyOptionslBand-widthlGainlOutput CouplinglNumber of channelsDescription The KY-PRM-XCH series multi-channel PIN photoreceiver integrates multi-channel of high linearity analog PIN detector and low noise broadband transimpedance amplifier with high gain, high sensitivity,AC coupling output and flat gain. The module is powered by positive 12V,and the fiber interface is universal for single-mode and multi-mode optical fiber. The elect...
------ The KY-BPRM seriesKey FeatureslWavelength C-bandlSingle bandwidth 29GHzlRate up to 4x32GbaudlInternal integrated PBS and 90° HybridlGain is automatic/manual controllPower supply DC 12VlSoftware controllK-type connector outputApplicationsl100Gbps DQPSK optical fiber communication systemlMicrowave photonic linkDescription The KY-BPRM-100G series 100Gbps coherent receiver module consists of two polarization beam splitters, a dual-polarization 90-degree optical mixer, four performance-matched balanced detectors with TIA and power and control circuits.The dual-polarization 90-degree optical mixer demodulates the incident signal light by an external reference light source, and is converted into an electrical signal by four balanced detectors, then amplified output by TIA. It fea...
16页次2/2HomeLast12NextEnd
Copyright ©2019 - 2021 Beijing Keyang Optoelectronic Technology Co., Ltd.
犀牛云提供企业云服务
Address:No. 7 Fengxian Middle Road, Haidian District, Beijing
电话:+86 0755-2955 6666
传真:+86 0755-2788 8009
邮编:330520


TEL 010-53704180 Email sales@kyphotonics.com