Language
箭头向下
CN
EN
Product
Product Center
Products   
产品列表
Product introductionThe KY-WBA-XX-AN analog wideband amplifier is a wideband low noise amplifier mainly used in analog transmission systems, which can be used to drive lithium niobate analog electro-optic intensity modulators. Its working frequency is 9K~20GHz, 0.05~30GHz, 100K~40G/50GHz, and can achieve 50GHz 20dBm saturated power output. It has wide bandwidth, high gain, low noise, high linearity, etc. It can also output one -10~10V DC voltage for electro-optic intensity modulator bias voltage adjustment, gain and bias voltage are displayed adjustable.This product is mainly used in microwave photonics, RF optical transmission system, picosecond pulse amplification, fiber delay line and other fields.Key FeatureslWorking frequency optional9K~20GHz、0.05~30GHz100K~40G/50GHzlGain20dBlSaturate...
------ The KY-PRM seriesKey FeatureslSpectral Range 850-1650nml3dB Band-width30GHzlSensitivity:-10dBmlSaturated optical power:4dBmlIntegrates low noise transimpedance amplifierlCompact structure 95x70x22mmlK-type connector outputApplicationslHigh-speed optical pulse detectionlMicrowave photonic linklOptical phased array radarlBrillouin fiber sensing systemlHigh-speed optical fiber communication systemDescription The KY-PRM-40G series 40GHz high speed photoreceiver integrates 40GHz PIN detector and low noise broadband transimpedance amplifier. It features high gain, high sensitivity, AC-coupled output and flat gain. The module is powered by DC 12V, the fiber interface is FC/APC, and the electrical signal is output by the K-type connector. It’s mainly used in high-speed fiber transmissi...
Product introductionThe KY-MU-15-PM series electro-optic phase modulation unit is an instrument developed by our company to realize 1550nm 10Gbps optical phase modulation. The modulation unit can work in C+L band, integrating electro-optic phase modulator,electrical signal amplifier and corresponding control circuit,and displays in real time in the display area. The electro-optic modulator and the electric amplifier work independently and can be used separately. This product is mainly used in scientific research, high-speed optical fiber communication systems, microwave photonic links and other fields. It can also be used as a standard optical signal generator for experiment or optical active device testing.Key Featuresl  Wavelength C+Ll  Low insertion lossl  Integrated...
Product introductionThe KY-PLS series 1550nm ns pulse light source adopts high-performance DFB laser, uniquely designed ATC&APC circuit and isolation control to ensure extremely high power and wavelength stability. At the same time, the built-in high-speed narrow pulse electric signal can realize the pulse output of 5ns. The pulse width and repetition frequency are adjusted by software, and the built-in optical amplifier can achieve peak power of 500W.This product is widely used in fiber component testing, optical fiber sensing system, laser radar, pulse fiber laser and other fields.Key Featuresl  Optional ITU wavelengthl  Peak power is optional20,40,80mW10~500W (with light amplification)l  Pulse width 5~100, 100~500ns adjustablel  Repeat frequency 10Hz~1MHzl  ...
Product introductionThe KY-EDFA-PA series Pre-EDFA is a fiber amplifier specially used for small signal amplification. It is usually placed at the front of optical receiver or photodetector to increase the sensitivity of photodetector. This product is a two-stage amplification structure. It adopts low-noise erbium-doped fiber and purely analog pump laser drive circuit to ensure its high gain and low noise. It can display input and output optical power,pump laser working current, working temperature , cooling current and other parameters in real time. This product is mainly used in high-speed optical fiber communication system, quantum communication, picosecond pulse amplification, optical fiber sensing systems and other fields.Key Featuresl  Wavelength C,L,C&Ll  Small signal ...
Product introductionThe KY-WBA-10G wideband amplifier is a driver amplifier mainly used for lithium niobate electro-optic intensity and phase modulator. Its bandwidth can reach 30K~11GHz, the highest can achieve 12.5Gbps NRZ wideband signal amplification up to 8Vpp.It can also output one -10~10V DC voltage for electro-optic intensity modulator bias voltage adjustment, gain and bias voltage are displayed adjustable.This product is mainly used in 10Gbps optical fiber communication systems, quantum communication, picosecond pulse amplification, optical fiber sensing systems and other fields.Key FeatureslBandwidth 30K~11GHzlGain23dblSaturated output 8VpplRise timelGain and bias voltage display are adjustablelDC bias -10~10VoutputlConvenient to useApplicationsl10Gbps optical fiber communication...
------ The KY-BPRM seriesKey FeatureslSpectral Range 850-1650nml3dB Band-width30GHzlSensitivity:-10dBmlSaturated optical power:4dBmlIntegrates low noise transimpedance amplifierlCompact structure 95x70x22mmlK-type connector outputApplicationsl40Gbps DQPSK/DPSK optical fiber communication systemlMicrowave photonic linkDescription The KY-BPRM-40G series 40Gbps high speed photoreceiver integrates two 40Gbps PIN photodiodes and low noise wideband transimpedance amplifier(TIA). It features high gain, high sensitivity, AC-coupled output and flat gain. The module is powered by DC 12V, two fiber input ports, the fiber interface is FC/APC, and the electrical signal is output by K-type connector. It’s mainly used in 40Gbps DQPSK/DPSK high-speed fiber transmission systems, microwave photonic lin...
Product introductionThe KY-MU-15-DPSK series DPSK optical modulation unit is an instrument developed by our company to realize 12.5Gbps DPSK optical signal modulation. The modulation unit can work in C+L band, and integrates low half-wave voltage electro-optic intensity modulator, high-saturation output electrical signal amplifier and corresponding bias point control circuit. The LED display area displays the bias point lock status in real time, which can make the modulation performance of the electro-optic intensity modulator no longer affected by external environmental temperature, vibration and other factors, and work stably for a long time.This product is mainly used in scientific research, high-speed optical fiber communication systems and other fields. It can also be used as a standa...
-----The KY-PRM-XCH seriesKey FeatureslSpectral Range 800-1700nml3dB Band-width Max. 1.5GHzlRise time Min.lThe number of channels: 3, 8, 18, 40, etc. lIntegrated amplifier amplifierlLow noise, high gainlSingle power supply DC 12VlSMA outputlCan be customizedApplicationslPicosecond light pulse detectionlLaser radarlOptical fiber sensing systemlSpectroscopyOptionslBand-widthlGainlOutput CouplinglNumber of channelsDescription The KY-PRM-XCH series multi-channel PIN photoreceiver integrates multi-channel of high linearity analog PIN detector and low noise broadband transimpedance amplifier with high gain, high sensitivity,AC coupling output and flat gain. The module is powered by positive 12V,and the fiber interface is universal for single-mode and multi-mode optical fiber. The elect...
53页次5/6HomeLast123456NextEnd
Copyright ©2019 - 2021 Beijing Keyang Optoelectronic Technology Co., Ltd.
犀牛云提供企业云服务
Address:No. 7 Fengxian Middle Road, Haidian District, Beijing
电话:+86 0755-2955 6666
传真:+86 0755-2788 8009
邮编:330520


TEL 010-53704180 Email sales@kyphotonics.com