Language
箭头向下
CN
EN
Product
Product Center
Products   
产品名称:

Analog Wideband Amplifier

上市日期: 2019-01-18
建议销售价: 0

Product introduction

The KY-WBA-XX-AN analog wideband amplifier is a wideband low noise amplifier mainly used in analog transmission systems, which can be used to drive lithium niobate analog electro-optic intensity modulators. Its working frequency is 9K~20GHz, 0.05~30GHz, 100K~40G/50GHz, and can achieve 50GHz 20dBm saturated power output. It has wide bandwidth, high gain, low noise, high linearity, etc. It can also output one -10~10V DC voltage for electro-optic intensity modulator bias voltage adjustment, gain and bias voltage are displayed adjustable.This product is mainly used in microwave photonics, RF optical transmission system, picosecond pulse amplification, fiber delay line and other fields.

Key Features

lWorking frequency optional

9K~20GHz0.05~30GHz

100K~40G/50GHz

lGain>20dB

lSaturated output 22dBm

lNoise figure <5dB

lGain and bias voltage display are adjustable

lDC bias -10~10Voutput

lConvenient to use

Applications

lMicrowave photonics

lRF optical transmission system

lSatellite communication system

lFiber delay line

lPicosecond pulse amplification

Parameters

Parameters

Symbol

Unit

Min.

Typ.

Max.

AC--Electrical Parameters

Working frequency

KG-WBA-20G-AN

F

Hz

9K


20G

KG-WBA-30G-AN

F

Hz

50M


30G

KG-WBA-40G/50G-AN

F

Hz

100k


40G/50G

Gain

G

dB

20

25


Saturated output power

Po

dBm

18

22


Noise Figure

dB

dB


4


Standing wave ratio

VSWR




2

Isolation


dB


-60


DC Bias

Output voltage

VDC

V

-10


10

Adjustment accuracy


V


0.1


Other Parameters

Input/output electrical signal interface

AC


SMA(f)/2.92(f)/1.85(f)

DC bias output interface

DC


SMA(f)

Voltage

VDC

V

AC 220

Dimension

LxWxH

mm

270x300x90

Communication


USB

Display area content


Electric amplifier gain/ Real-time bias voltage


Hot Products / Hot Products More
2019 - 01 - 17
Product introductionThe KY-QA/P series quadrant photoreceiver adopts imported four-quadrant photodiode, integrated power supply circuit and corresponding low-noise amplifier circuit. The response wavelength is 400-1100nm (material is Si) and 800-1700nm (material is InGaAs). It’s available in a variety of types, mainly used for laser beam position measurement in systems and widely used in laser ali...
2019 - 01 - 17
Product introductionThe KY-BPRM series balanced photoreceiver integrates two matched high linearity analog PIN detector and low noise broadband transimpedance amplifier, with high gain, high sensitivity, DC coupling output and high common-mode rejection ratio(CMRR). This can effectively reduce the common mode noise of the input light and improve the signal to noise ratio of the system. The module ...
2019 - 01 - 17
Product introductionThe KY-APRM series avalanche photoreceiver uses imported avalanche photodiode with high gain, fast response and low dark current, integrates low-noise broadband transimpedance amplifier, boost and temperature compensation circuit, with high gain and high sensitivity. The module is powered by positive 12V, and the input optical interface is optional for optic fiber or space inci...
2019 - 01 - 17
Product introductionThe KY-PRM series low noise PIN photoreceiver integrates high linearity analog PIN detector and low noise broadband transimpedance amplifier with high gain, high sensitivity, AC coupling output and flat gain. The module is powered by positive 12V, and the input optical interface is optional for optic fiber or space incidence. The fiber interface is universal for single-mode and...
Copyright ©2019 - 2021 Beijing Keyang Optoelectronic Technology Co., Ltd.
犀牛云提供企业云服务
Address:No. 7 Fengxian Middle Road, Haidian District, Beijing
电话:+86 0755-2955 6666
传真:+86 0755-2788 8009
邮编:330520


TEL 010-53704180 Email sales@kyphotonics.com