Language
箭头向下
CN
EN
Product
Product Center
Products   
产品名称:

30K-10G Pulse Electric Amplifier

上市日期: 2019-01-18
建议销售价: 0

Product introduction

The KY-WBA-10G-D-PL pulse electric amplifier is a driver amplifier for low duty cycle and narrow pulse amplification,and mainly used for lithium niobate electro-optic intensity and phase modulator. Its bandwidth can reach 30K~11GHz, and can realize the amplification of electric pulse signal with pulse width of 100ps, the maximum amplitude can reach 8Vpp.It can also output one -10~10V DC voltage for electro-optic intensity modulator bias voltage adjustment, gain and bias voltage are displayed adjustable.This product is mainly used in 10Gbps optical fiber communication systems, quantum communication, picosecond pulse amplification, optical fiber sensing systems and other fields.

Key Features

lBandwidth 30K~11GHz

lGain>23db

lSaturated output 6.5Vpp

lRise time<35ps

lGain and bias voltage display are adjustable

lDC bias -10~10Voutput

lConvenient to use

Applications

l10Gbps optical fiber communication systems

lQuantum communication

lPicosecond pulse amplification

lOptical fiber sensing systems

Parameters

Parameters

Symbol

Unit

Min.

Typ.

Max.

AC--Electrical Parameters

Bandwidth (-3dB)

High frequency

S21-High

GHz

11



Low frequency

S21-Low

KHz


25

30

Rate


bps

100k


12.5G

Pulse width


ps

80



Repeat frequency

f

Hz

30K


10G

Gain

G

dB

23



Gain fluctuation@50M-11GHz


dB


1.5

2.5

Output amplitude*

Vout

Vpp



6.5

Saturated output power

Ps

dBm

21

22


Isolation

S12

dB

-40



Electrical return loss@50M-11GHz

Input

S11

dB


-13

-12

Output

S22

dB


-12

-10

DC Bias

Output voltage

VDC

V

-10


10

Adjustment accuracy


V


0.1


Other Parameters

Input/output electrical signal interface

AC


SMA(f)

DC bias output interface

DC


SMA(f)

Voltage

VDC

V

AC 220

Dimension

LxWxH

mm

270x300x90

Communication


USB

Display area content


Electric amplifier gain/ Real-time bias voltage

*Output amplitude is related to pulse duty cycle.




Hot Products / Hot Products More
2019 - 01 - 17
Product introductionThe KY-QA/P series quadrant photoreceiver adopts imported four-quadrant photodiode, integrated power supply circuit and corresponding low-noise amplifier circuit. The response wavelength is 400-1100nm (material is Si) and 800-1700nm (material is InGaAs). It’s available in a variety of types, mainly used for laser beam position measurement in systems and widely used in laser ali...
2019 - 01 - 17
Product introductionThe KY-BPRM series balanced photoreceiver integrates two matched high linearity analog PIN detector and low noise broadband transimpedance amplifier, with high gain, high sensitivity, DC coupling output and high common-mode rejection ratio(CMRR). This can effectively reduce the common mode noise of the input light and improve the signal to noise ratio of the system. The module ...
2019 - 01 - 17
Product introductionThe KY-APRM series avalanche photoreceiver uses imported avalanche photodiode with high gain, fast response and low dark current, integrates low-noise broadband transimpedance amplifier, boost and temperature compensation circuit, with high gain and high sensitivity. The module is powered by positive 12V, and the input optical interface is optional for optic fiber or space inci...
2019 - 01 - 17
Product introductionThe KY-PRM series low noise PIN photoreceiver integrates high linearity analog PIN detector and low noise broadband transimpedance amplifier with high gain, high sensitivity, AC coupling output and flat gain. The module is powered by positive 12V, and the input optical interface is optional for optic fiber or space incidence. The fiber interface is universal for single-mode and...
Copyright ©2019 - 2021 Beijing Keyang Optoelectronic Technology Co., Ltd.
犀牛云提供企业云服务
Address:No. 7 Fengxian Middle Road, Haidian District, Beijing
电话:+86 0755-2955 6666
传真:+86 0755-2788 8009
邮编:330520


TEL 010-53704180 Email sales@kyphotonics.com