产品列表
Featuresl ITU-T wavelengthl Low phase noisel Narrow Linewidth: l Optical power: Max.20dBml Low RIN noise: -165dBc/Hz @100KHzl Frequency modulation range: 5GHzl PM fiber pigtaill Easy to useApplicationl Distributed fiber Acoustic Sensing systeml LIDARl Test & Measurementl Seed source for fiber lasersIntroductionKY-CTM-xx narrow linewidth tunable single-frequency laser module is used for the Coherent LIDAR, using an unique the semiconductor external cavity structure. The typical output bandwidth is less than 20KHz linewidth and narrow linewidth FM laser module, with ultra-low RIN noise and excellent Frequency modulation performance, is now widely used in vehicle-mounted lidar and optical fiber sensing detection system....
------KY-BPD SeriesFeatures:l High reliabilityl DC coupledl Low Group delayl Bandwidth up to 25GHZl CMRR 30dBl Built-in Bias-Tl Hermetic package with SMA RF connectorApplications:l Optical fiber sensorl Coherent optical systeml Doppler lidarl DPSK/ DQPSK Communicationl Science analysis and experimentElectrical/Optical Characteristics (T= 25°C, VPD+=5V, VPD-=-5V, λ=1.55μm)ParameterSymbolMin.Typ.Max.Unit-3dB bandwidth-10GBW1010/25GHz-25G25wavelength rangeλ11001650nmResponsivity-10GRe0.900.94A/W-25G0.800.85Common Mode Rejection RatioCMRR2530dBDark currentId1020nASaturation Optical PowerPs10dBmOptical return lossRL25dBRF return lossS22-10dBAbsolute Maximum Rating (T= 25℃)ParameterSym.RatingUnitStorage temperature rangeT...
------The KY-PD SeriesFeatureslSpectral range 850 ~ 1650nml3dB bandwidth Max.70GHzlResponsivity 0.85A / WlSmall sizelHermetically sealedlHigh reliabilitylSMA / K /1.85mm outputApplicationslHigh-speed transmission equipmentlRadio over fiverlOptical fiber sensing systemDescription KY-PD-XX high-speed photodetector use high-performance PIN detector, which has the characteristics of high bandwidth, high responsivity, flat gain, small size, etc. The power supply is DC 5V, and the fiber interface is FC / APC, SMA / K /1.85mm output port, mainly used in high-speed optical fiber transmission system, ROF, optical fiber sensing system.ParametersParametersSymbolMin.Typ.Max.UnitSpectral responsel8501650nmDark current(VR=5V)Id0.15nAResponsivity(VR=5V)-10G/20GR0.85A/W-40G/70G0.50.6Ba...
------ The KY-MD-XX seriesKey Featuresl 10G, 20G, 40GHz optional bandwidthl Gain 25dBl Saturated output Max.25dBm (11Vpp)l Rise time Min.l Low jitterl DC12V power supplyl Easy to useApplicationsl High-speed optical fiber communication systeml Quantum communicationl Picosecond pulse amplificationl Optical fiber sensing systemProduct Listl 10G driver modulel 10G high output driver modulel 20G driver modulel 40G driver module DescriptionThe KY-MD-XX series electro-optic modulator driver module is a broadband, high-output driver amplifier mainly used for lithium niobate electro-optical intensity and phase modulator. Its working bandwidth is up to 30K ~ 40GHz, and it can achieve a maximum of 42G...
FeatureslC and L-Band OperationlLow insertion losslHigh bandwidthlER option 35/40dBlLow half-wave voltagelIntegrated Monitor PhotodiodelTelecordia GR-468-COREApplicationslHigh-speed transmission equipmentlMicrowave fiber linkslOptical fiber sensing systemlLaser mode lockingDescription The LiNbO3 electro-optical intensity modulator based on the M-Z push-pull structure has a low half-wave voltage and stable physical and chemical characteristics, and the device has a high response rate, and is therefore widely used in high-speed optical communication systems, optical Q-switched systems, laser mode-locking, and fiber sensing. ParametersParametersSymbolMin.Typ.Max.UnitOptical ParametersWavelengthl15251565nmInsertion lossIL3.54dBOptical return lossORL-45dBExtinction rati...
------The KY-PM-15 SeriesFeatureslC-bandl3dB bandwidth 300M, 10G, 20GlLow half-wave voltagelHigh damage optical powerlInsertion lossApplicationslOptical fiber communicationlLaser coherent synthesislPhase delay (movement)lQuantum communicationlROFDescriptionThe KY-PM-15 series Lithium niobate electro-optical phase modulator has low insertion loss, high modulation bandwidth, low half-wave voltage, high damage optical power, etc. This product is mainly used for optical chirp control in high-speed optical communication systems, phase delay in coherent communication systems, the generation of optical sidebands in ROF system, reducing stimulated Brillouin scattering (SBS) in analog optical fiber communication systems and other fields.ParametersParametersSymbolMin.Typ.Max.UnitOptical Pa...
Product introductionThe KY-EDFA-PM series PM-EDFA is a single-polarization-amplified erbium-doped fiber amplifier. The main optical path of the amplifier is a fully polarization-maintaining optical path (slow-axis operation).High-quality polarization-maintaining devices are used to ensure the polarization extinction ratio of the overall optical path is better than 20dB and output up to 33dBm can be achieved.For different applications, a variety of amplification structures can be selected: 1, conventional single-stage amplification structure; 2, single-stage low-noise optimization structure; 3, dual-stage amplification structure; 4, dual-stage structure, three-stage amplification, etc. . For different applications, the lowest noise can achieve a noise figure of 3.6dB, and the high gain can ...
Key FeatureslSpectral Range 400-1700nmlFiber or free space inputl3dB Band-width DC-2G/5GlRise time Min.lLow noise, flat responselBattery poweredlCompact structureApplicationslPulse light detectionlLaser measurementlUltrafast opticsDescriptionThe KY-PDM series photoreceiver without amplifier adoptshigh-speed and high-linearity analog PIN detector. It has a direct 50 ohm coupled output at the back end,with fast response, low noise and flat response. The module is powered by battery,and the input optical interface is optional for optic fiber or space incidence. This series of products are suitable for applications where the optical power is in the order of mW, such as pulse light waveform detection, pulsed laser measurement and other fields.Performance ParametersPNKY-PDM-2G-SKY-PDM-2G-ISpectr...
------ The KY-BPRM seriesKey FeatureslSpectral Range 400-1700nmlVarious 3dB band-width optionslWith output monitoringlRise time Min.lCMRR30dBlLow noiselSingle power supply DC 12VlDimensions 47x42x20mmlCan be customizedApplicationslNanosecond optical pulse detectionlLaser radarlBrillouin Optical Fiber Sensing Systemlf-OTDR lOCT(Optical coherent tomography) Options lPhotosensitive surfacelBand-widthlGainlOutput CouplingDescription The KY-BPRM series balanced photoreceiver integrates two matched high linearity analog PIN detector and low noise broadband transimpedance amplifier, with high gain, high sensitivity, DC coupling output and high common-mode rejection ratio(CMRR). This can effectively reduce the common mode noise of the input light and improve the signal to noise ratio of the s...