Key FeatureslSpectral Range 400-1700nmlFiber or free space inputl3dB Band-width DC-2G/5GlRise time Min.lLow noise, flat responselBattery poweredlCompact structureApplicationslPulse light detectionlLaser measurementlUltrafast opticsDescriptionThe KY-PDM series photoreceiver without amplifier adoptshigh-speed and high-linearity analog PIN detector. It has a direct 50 ohm coupled output at the back end,with fast response, low noise and flat response. The module is powered by battery,and the input optical interface is optional for optic fiber or space incidence. This series of products are suitable for applications where the optical power is in the order of mW, such as pulse light waveform detection, pulsed laser measurement and other fields.Performance ParametersPNKY-PDM-2G-SKY-PDM-2G-ISpectr...
------ The KY-BPRM seriesKey FeatureslSpectral Range 400-1700nmlVarious 3dB band-width optionslWith output monitoringlRise time Min.lCMRR30dBlLow noiselSingle power supply DC 12VlDimensions 47x42x20mmlCan be customizedApplicationslNanosecond optical pulse detectionlLaser radarlBrillouin Optical Fiber Sensing Systemlf-OTDR lOCT(Optical coherent tomography) Options lPhotosensitive surfacelBand-widthlGainlOutput CouplingDescription The KY-BPRM series balanced photoreceiver integrates two matched high linearity analog PIN detector and low noise broadband transimpedance amplifier, with high gain, high sensitivity, DC coupling output and high common-mode rejection ratio(CMRR). This can effectively reduce the common mode noise of the input light and improve the signal to noise ratio of the s...
------ The KY-APRM seriesKey FeatureslMultiple series of productsSi APDInGaAs APDDual-channel APD Module for DTSTTL-output APD Module for FSOl3dB Band-width Max. 10GHzlRise time Min.lIntegrated amplifier circuitlIntegrated boost and temperature compensation circuitlLow noise, high gainlφ20mm Adapter for optical antennalM4 adapter for the M4 post mountslSingle power supply DC 12VlDimensions 47x42x26mmlSMA outputlCan be customizedApplicationslPulse form measurementslLaser radarlLaser CommunicationlOptical Fiber Sensing SystemlSpectroscopylOTDROptionslPhotosensitive Surface lBand-widthlGainlOutput CouplinglVariable Gain by softwarelDigital TTL level outputDescription The KY-APRM series avalanche photoreceiver uses imported avalanche photodiode with high gain, fast response and low dark c...
----- The KY-PRM seriesKey FeatureslSpectral Range 200-3600nml3dB Band-width Max. 40GHzlRise time Min.lIntegrated amplifier circuitlLow noise, high gainlφ20mm Adapter for optical antennalM4 adapter for the M4 post mountslSingle power supply DC 12VlDimensions47x42x20mm（Fiber connector）47x42x26mm（Free space connector）lSMA outputlCan be customizedApplicationslPicosecond optical pulse detectionlLaser radarlOptical Fiber Sensing SystemlOptical inspectionOptionslBand-widthlGainlCouplinglOptical interfaceDescription The KY-PRM series low noise PIN photoreceiver integrates high linearity analog PIN detector and low noise broadband transimpedance amplifier with high gain, high sensitivity, AC coupling output and flat gain. The module is powered by positive 12V, and the input optical interface ...
------ The KY-BPRM-4CH seriesKey FeatureslSpectral Range 400-1700nmlVarious 3dB band-width optionslRise time Min.lIntegrates four channelslCMRR30dBlLow noiselSingle power supply DC 5VlDimensions 86x47x36mmlCan be customizedApplicationslLaser radarlBrillouin Optical Fiber Sensing Systemlf-OTDRlOptical heterodyne detection systemOptionslBand-widthlGainlOutput CouplinglNumber of channelsDescription The KY-BPRM-4CH series four channels balanced photoreceiver is a product specifically developed for the optical heterodyne detection system. It integrates four balanced photoreceiver with the same performance, each of them integrates two matched high linearity analog PIN detector and low noise broadband transimpedance amplifier, with high gain, high sensitivity, DC coupling output and high com...
-----The KY-PRM-XCH seriesKey FeatureslSpectral Range 800-1700nml3dB Band-width Max. 1.5GHzlRise time Min.lThe number of channels: 3, 8, 18, 40, etc. lIntegrated amplifier amplifierlLow noise, high gainlSingle power supply DC 12VlSMA outputlCan be customizedApplicationslPicosecond light pulse detectionlLaser radarlOptical fiber sensing systemlSpectroscopyOptionslBand-widthlGainlOutput CouplinglNumber of channelsDescription The KY-PRM-XCH series multi-channel PIN photoreceiver integrates multi-channel of high linearity analog PIN detector and low noise broadband transimpedance amplifier with high gain, high sensitivity,AC coupling output and flat gain. The module is powered by positive 12V,and the fiber interface is universal for single-mode and multi-mode optical fiber. The elect...
------The KY-ICR seriesKey Featuresl Wavelength: C-bandl Single-channel bandwidth:10M/200M/1Gl Integrated 90 ° Hybrid and 4-way balanced detectorl High gainl Low noisel AC couplingl Easy to usel DC 5V power supplyl SMA outputApplicationsl Space optical communication systeml Optical fiber sensing systemDescriptionThe KY-ICR-BW coherent receiver module consists of two polarization beam splitters, a dual-polarization 90-degree optical mixer, four performance-matched balanced detectors and power and control circuits. The dual-polarization 90-degree optical mixer demodulates the incident signal light by an external reference light source, and is converted into an electrical signal by four balanced detectors, then amplified o...
------ The KY-BPRM seriesKey Featuresl Spectral Range 800~1700nm l 3dB bandwidth 5GHzl Rise timel CMRR30dBl Low noisel Single power supply DC 12Vl Dimensions 47x42x20mml Can be customizedApplicationsl Coherent optical communicationl Laser radarl Brillouin Optical Fiber Sensing Systeml f-OTDR l OCT(Optical coherent tomography) Description The KY-BPRM series balanced photoreceiver integrates two matched high linearity analog PIN detector and low noise broadband transimpedance amplifier, with high gain, high sensitivity, AC coupling output and high common-mode rejection ratio(CMRR). This can effectively reduce the common mode noise of the input light and improve the signal to noise ratio of the system. The...