Language
箭头向下
CN
EN
Product
Product Center
Products   
Product introductionThe KY-EDFA-PM series PM-EDFA is a single-polarization-amplified erbium-doped fiber amplifier. The main optical path of the amplifier is a fully polarization-maintaining optical path (slow-axis operation).High-quality polarization-maintaining devices are used to ensure the polarization extinction ratio of the overall optical path is better than 20dB and output up to 33dBm can be achieved.For different applications, a variety of amplification structures can be selected: 1, conventional single-stage amplification structure; 2, single-stage low-noise optimization structure; 3, dual-stage amplification structure; 4, dual-stage structure, three-stage amplification, etc. . For different applications, the lowest noise can achieve a noise figure of 3.6dB, and the high gain can ...
Product introductionThe KY-EDFA-PL series pulse EDFA is a fiber amplifier specially used for pulsed optical signal amplification. It can amplify optical pulses with a frequency of 1Hz-1MHz and a pulse width of less than 100ns,the maximum output peak power can reach 500W. This product adopts low-noise erbium-doped fiber and purely analog pump laser drive circuit to ensure its high gain and low noise figure. It can display input and output optical power, pump laser working current, working temperature , cooling current and other parameters in real time. This product is mainly used in optical fiber communication system, quantum communication systems, picosecond pulse amplification, laser radar, optical fiber sensing systems such as Raman, Brillouin and φ-OTDR,and other fields.Key Featuresl...
Product introductionThe KY-EDFA-HP series high power fiber amplifier uses imported high-performance double-clad erbium&ytterbium co-doped fibers and high-power multimode pump lasers to achieve continuous output up to 10W. The purely analog pump laser drive circuit guarantees the high gain and low noise figure of the amplifier.The desktop machine can display the input and output optical power, pump laser operating current, working temperature, cooling current and other parameters in real time.This product is mainly used in long-distance optical fiber communication systems, optical fiber sensing systems, scientific research and other fields.Key Featuresl  Wavelength 1540~1570nml  Output power max.10Wl  Low noise figurel  Output power is adjustablel  Module, deskt...
Product introductionThe KY-EDFA-BA series BA-EDFA is a fiber amplifier specially used for single-wavelength or multi-wavelength. It is usually placed at the back end of the optical transmitter to increase the optical power of the transmitted signal. This product adopts high erbium-doped fiber and purely analog pump laser drive circuit to ensure its high gain and low noise. It can display input and output optical power,pump laser working current, working temperature , cooling current and other parameters in real time. This product is mainly used in long-distance optical fiber communication system, quantum communication, picosecond pulse amplification, optical fiber sensing systems and other fields.Key Featuresl  Wavelength C,L-bandl  Input range -10~10dBml  Gain Max.37dBl...
Product introductionThe KY-EDFA-PA series Pre-EDFA is a fiber amplifier specially used for small signal amplification. It is usually placed at the front of optical receiver or photodetector to increase the sensitivity of photodetector. This product is a two-stage amplification structure. It adopts low-noise erbium-doped fiber and purely analog pump laser drive circuit to ensure its high gain and low noise. It can display input and output optical power,pump laser working current, working temperature , cooling current and other parameters in real time. This product is mainly used in high-speed optical fiber communication system, quantum communication, picosecond pulse amplification, optical fiber sensing systems and other fields.Key Featuresl  Wavelength C,L,C&Ll  Small signal ...
Product introductionThe KY-QRA series raman fiber amplifier uses imported high-performance and high-power 1480nm pump lasers, which can achieve 1W continuous output by polarization combining. The purely analog pump laser drive circuit guarantees the high gain and low noise figure of the amplifier.The desktop machine can display the input and output optical power, pump laser operating current, working temperature, cooling current and other parameters in real time.This product is mainly used in long-distance optical fiber communication systems, optical fiber sensing systems, scientific research and other fields.Key Featuresl  Wavelength 1527~1563nml  Output power is optional 500mW, 1Wl  Gain Typ.12dBl  Noise figurel  Gain flatnessl  Output power is adjustablel&#...
6页次1/1HomeLast1NextEnd
Copyright ©2019 - 2021 Beijing Keyang Optoelectronic Technology Co., Ltd.
犀牛云提供企业云服务
Address:Room 303, Building C2, Yard 18, Yongrun Road, Haidian District, Beijing 
电话:+86 0755-2955 6666
传真:+86 0755-2788 8009
邮编:330520
TEL 010-53396006 Email sales@kyphotonics.com